Table of Contents
Advertisement
Cleaning and care
Starting the Self Clean program
Danger of burns!
When Self Cleaning the front of the
oven becomes hotter than with
normal oven use.
Prevent children from touching the
oven during the Self Clean program.
Select
Maintenance
Select
Self Clean
Select the level required according to
the level of soiling.
Confirm with OK.
Follow the instructions in the display.
Confirm with OK.
Starting the Self Clean program
To start the Self Clean program
immediately, select
Confirm by touching OK.
The Self Clean program will then start.
The door locks automatically. The oven
heating and cooling fan functions are
then automatically activated.
The oven light does not come on during
the Self Clean program.
The time remaining for the Self Clean
program appears in the display. This
time cannot be changed.
You can use the timer while the Self
Clean program is running. When the set
time has elapsed, the buzzer will sound
and will flash The time will then
continue to increase in the display.
108
.
.
.
Start Now
The buzzer will stop and the visual
indicators will go out after you touch
the "Timer" sensor.
Delaying the start of the Self Clean
program
To delay the start of the Self Clean
program, select
Set the desired time for starting the
Self Clean program.
Confirm by touching OK.
The door will lock automatically.
and the set start time appear in the
display.
Up until the start time you can alter the
start and end time with
As soon as the start time has been
reached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
.
Start Later
Start at
.
Change
Advertisement
Table of Contents
