Removing The Bobbin Case; Removing The Bobbin - ELNA expressive 940 Instruction Manual

q
z
x
e
z
w
r
t
c
w
q
x
e
y
v

Removing the bobbin case

CAUTION:
Turn the power switch off before removing the
bobbin case.
z Open the hook cover toward you.
q Hook cover
x Hold and open the latch of the bobbin case.
Take the bobbin case out from the machine.
w Latch
NOTE:
Do not force to pull the thread keeper when you
remove the bobbin case.
e Thread keeper
Inserting the bobbin
z Insert the bobbin into the bobbin case leaving a 2"
(5 cm) thread tail as illustrated.
q Bobbin
w Bobbin case
x Draw the thread to slip it into the slit of the bobbin
case.
e Slit
c Pull the thread to slide it under the tension blade
until the thread comes out from the opening.
r Tension blade
t Opening
v Pass the thread through the hook.
y Hook
NOTE:
The machine you have purchased may differ from the
one depicted in the help movie or instructional movie
CD-ROM, due to updating or improvement.
NOTE:
The bobbin should turn clockwise when the thread is
pulled.
17