ELNA expressive 940 Instruction Manual page 72

⁄9
7
Trim Tail Length
M
Thread Break Stitch Count
8
Jump Thread Trimming
Number of Jumps
3
¤0
7
Trim Tail Length
M
Thread Break Stitch Count
8
Jump Thread Trimming
Number of Jumps
3
¤1
7
Trim Tail Length
M
Thread Break Stitch Count
8
Jump Thread Trimming
Number of Jumps
3
¤2
7
Trim Tail Length
M
Thread Break Stitch Count
8
Jump Thread Trimming
Number of Jumps
3
⁄9 Setting the trim tail length
q
Some times you need to adjust the tail length of the
thread being trimmed depending on the thickness
and type of the thread.
Press the circle key next to "+" or "–" to adjust the
trim length.
You can select one of the following options.
¤0 Setting the thread detector sensitivity
q
You can adjust the sensitivity of the thread detector
by setting stitch count to judge thread breakage.
Press the circle key next to "+" or "–" to adjust the
sensitivity.
The adjustable range is from 3 to 16.
¤1 Jump thread trimming ON/OFF
w
If you wish to trim jump threads automatically, press
the circle key next to "ON".
ON
A check mark will appear in the box.
OFF
Press the circle key next to "OFF" to disable the jump
thread trimming.
¤2 Jump thread trimming threshold
q
You can adjust number of jumps, which triggers the
jump thread trimming.
The machine will trim the jump thread automatically
after the specified number of jump stitches.
Press the circle key next to "+" or "–" to adjust the
number of jumps.
Press the OK key to register the new settings.
Or press the next page key to go to the next page.
68
q Circle key (+, –)
S: Short
M: Medium
L: Long
q Circle key (+, –)
w Circle key (ON, OFF)
q Circle key (+, –)