ELNA expressive 940 Instruction Manual page 4

CAUTION
Removing the Head Stoppers
To prevent the machine from a damage during
transportation, the machine is delivered with the
head stoppers installed on the guide bar to fix the
needle bar head.
Make sure to remove the two head stoppers on both
sides of the guide bar before operating the machine.
q
When you repack the machine for transportation,
attach the two head stoppers against the metal
frame with the screws to fix the needle bar head.
w
NOTE:
Select the needle bar No. 3 in the Ready to Sew
mode and turn the power off then attach the
stoppers (refer to pages 26, 39) .
III
q Head stopper
w Guide bar