Keyless Entry; Tire Pressure Monitoring System (Tpms) - Volkswagen 2014 Jetta Hybrid Quick Start Manual

Hide thumbs Also See for 2014 Jetta Hybrid:
Table of Contents

Advertisement

Keyless Entry

Unlock
Make sure you have your key fob with you.*
Then slide hand behind door handle, wait for the
door to unlock. (Remember to avoid touching the
indentation on the handle front, or the door will
remain locked.) Then pull the handle. To ensure
your safety, only the driver's door unlocks.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under KEYLESS ENTRY.

Tire Pressure Monitoring System (TPMS)

Correct tire pressure
Cooler temperatures may cause a warning to appear and then
disappear as the tires warm up. This is a good reminder to check
and adjust the tires to the proper inflation pressure.
LEARN MORE AT
knowingyourvw.com
Lock
• Make sure you have your key fob with you.*
Then touch your thumb to the depression on
the handle.
• The door will not lock if you are grasping the
handle.
• Be sure not to stand too close to the vehicle
for prolonged periods of time with the key on
you, as it may drain your vehicle's battery.
*Some heavy purses, bags, etc., may block the signal from your
vehicle to your key fob, preventing keyless access from working.
The correct tire pressure is displayed on the sticker on the driver's door jamb. Inflate your
tires to those specifications, not to the number on your tires.
If you see the TPMS light on your instrument panel or the message "Tire pressure too low"
in the multifunction display, check all tires and inflate the low tires to the correct pressure
as soon as possible.
TPMS set button
After inflating the low tire(s) to the correct pressure, turn the ignition on and press the SET
button inside the glove compartment for five seconds, until you hear the chime.
The TPMS light will go out after 20 minutes of normal driving.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under TIRE PRESSURE MONITORING SYSTEM (TPMS).
Push button start
When starting the vehicle, the key fob must be in the
vehicle cabin, otherwise the "Key not in range" message
will appear on the multifunction display.
Press down the brake pedal.
Press the START/STOP button on the console.
Seeing the TPMS light? Here's what to do.
Keyless Entry /
Push button stop
Make sure your vehicle
is parked. Press the
START/STOP button.
Your vehicle's engine
will turn off.
NOTE: Keyless Entry is available on certain trim lines.
TPMS
25
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents