Folder Name; Noise Reduction - Konica Minolta DiMAGE Z3 Instruction Manual

FOLDER NAME

All recorded images are stored in folders on the memory card. Two folder-
name formats are available in section 2 of the setup menu, standard and
date.
Standard folders have an eight character name. The initial folder is named
100KM006. The first three digits are the folder's serial number, which will
increase by one each time a new folder is created. The next two letters
refer to Konica Minolta, and the last three numbers indicate the camera
used; 006 indicates a DiMAGE Z3.
A date folder name also starts with the three digit serial number and is
followed by one register for the year, two register for the month, and two
registers for the day: 101YMMDD. The folder 10140719 was created in 2004 on July 19
With the date folder format selected, when an image is recorded, a new folder with the
day's date is created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. If the
file number memory function is off (p. 89), when a new folder is created, the serial
number in the image-file name is reset to 0001. If file number memory function is on, the
serial number in the image-file is one greater than the last image saved. For more
information on folder organization and file names, see page 102.

NOISE REDUCTION

This function reduces the affect of dark noise caused by long
exposures. Noise reduction is only applied to exposures of
one second or longer. Dark-frame subtraction is applied to
each image after it is captured. The processing time varies
from image to image; a message will be displayed during this
period. Noise reduction can be turned off in section 2 of the
setup menu.
90 S
ETUP MENU
100KM006
(Standard)
10140719
(Date)
File # memory Off
Folder name Std. form
Noise reductn On
Date/Time set –
Date imprint Off
th .