Custom Key Function - Konica Minolta DiMAGE Z3 Instruction Manual

CUSTOM KEY FUNCTION

The function assigned to the flash mode button can be
selected among the flash mode, drive mode, white balance,
focus mode, color mode, and camera sensitivity. This can
be set in section 1 of the P, A, S, and M menus (p. 44). The
flash mode can also be changed in section 2 of the P, A, S,
and M menus.
When the key-function option is selected and
entered, a selection screen appears. Use the
four-way key of the controller to select the
function. Press the central button to complete
the operation.
Pressing the flash-mode button changes the function set in
the menu. Press the central button of the controller or press
the shutter-release button partway down to apply the
setting.
:select
:enter
:enter
When selecting the continuous
advance, progressive capture, or
bracketing drive mode, or preset
white balance, a selection screen appears. Use the left/right
keys of the controller to display the appropriate mode or
bracketing increment and press the central button of the
controller to select it.
When selecting custom white balance, the calibration
screen appears. Fill the frame with a white object and press
the central button of the controller to calibrate the camera.
Drive mode Single
Image size 2272x1704
Quality Standard
White balance Auto
Key func. Flash mode
Key func.
Flash mode Focus mode
Drive mode Color mode
White balance Sensitivity
:sel. :enter
65