About Dpof; Dpof Setup - Konica Minolta DiMAGE Z3 Instruction Manual

ABOUT DPOF

This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format)
allows direct printing of still images from digital cameras. After the DPOF file is created,
the memory card is simply taken to a photofinishing service or inserted into the memory-
card slot of DPOF compatible printers. When a DPOF file is created, a misc. folder is
automatically created on the memory card to store it (p. 102).

DPOF SETUP

The DPOF-set menu option is used to create an order for standard prints from still
images on the memory card. Single, multiple, or all images can be printed. Print orders
are created in section 3 of the playback menu (p. 72). The print menu option has four
settings:
This
To create a DPOF file for the displayed or highlighted image.
frame
All
To create a DPOF file for all images on the memory card.
frames
To chose a group of images to be printed or when the number of copies of
each image varies. When selected, the frame selection screen appears.
Use the left/right keys of the controller to highlight an image to be printed.
Pressing the up key will mark the image with the print indicator. The number
next to the indicator shows the number of copies that will be printed.
Pressing the up key increases the number of copies, pressing the down key
Marked
frames
decreases the number. A maximum of nine copies can be ordered. To
deselect an image for printing, press the down key until the number of
copies reaches zero and the print indicator disappears. Continue until all the
images to be printed are marked. Press the central button of the controller
to create the DPOF file, or press the menu button to cancel the operation
and return to the playback menu.
Cancel
To delete the DPOF file.
all
82 A
DVANCED PLAYBACK