DISCONNECTING THE CAMERA FROM A COMPUTER
Never disconnect the camera when data is being transferred between the camera
and computer,
Windows 98 / 98 Second Edition
Confirm no files are being copied between the camera and computer. Disconnect the
USB cable.
Windows Me, 2000 Professional, and XP
To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window opens indicating the device to be
stopped.
Click on the small window to stop
the device. The safe-to-remove-
hardware window opens. Close the
window and then disconnect the
USB cable.
When more than one external device are connected to the computer, repeat the
procedure above except right click on the unplug-or-eject-hardware icon. This opens the
unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
Downloaded From camera-usermanual.com Minolta Manuals
90
D
-
ATA
TRANSFER MODE