Cleaning Agents - Siemens HR725223N Instruction Manual

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
■
remover,
high-pressure cleaners or steam jets.
■
Wipe the appliance with plenty of water and some washing-up liquid. Always wipe parallel to the natural
Stainless steel
grain. Otherwise, you could scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease,
fronts
starch and albumin (e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or
rough cleaning cloths. The stainless steel fronts can be polished using a special care product. Follow the
manufacturer's instructions. You can purchase special stainless steel cleaner from our after-sales service or
from specialist retailers.
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Enamel surfaces and
lacquered surfaces
Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and
Burners and steel
some hot water. Remove the burner cup and cover. Clean with a sponge and some hot water and washing-
grid of the gas burn-
up liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with
ers
a small, soft brush. The gas burners only work if the igniters are clean. Remove food residue from the
burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must not be
allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or damaged dur-
ing cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup. If the
parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated with
black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function of
the burner. Replace the wire rack in the oven.
Electric hob (option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the
hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and
food residue immediately.
The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring
Metal ring of the
with the hard side of a scouring sponge and some liquid scouring agent. Do not touch the adjacent sur-
electric hob (option)
faces. This could become damaged.
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Knobs
Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These
Glass panel
could scratch and damage the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces. Never
Oven floor, ceiling
apply to the back panel.
and side panels
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Glass cover on the
oven light
Soak in hot soapy water. Clean with a brush or a sponge.
Accessories
Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal sur-
Aluminium baking
faces with a knife or similar sharp object. Clean horizontally with some washing-up liquid and a damp glass
tray (option)
cleaning cloth or a microfibre cloth. Dry with a soft cloth. Do not use any abrasive materials, scouring
sponges or rough cleaning cloths. They could scratch the baking tray
If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic
Childproof lock
parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will
(option)
not work properly.
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Plinth drawer
(option)
Soak in hot soapy water. Clean with a brush or sponge.
Accessories
Cleaning the self-cleaning surfaces in the cooking
compartment
The back wall in the cooking compartment is coated with a
highly porous ceramic layer. This coating absorbs and
disintegrates splashes from baking and roasting while the oven
is in operation. The higher the temperature and the longer the
oven is in operation, the better the result will be.
If splashes are still visible even after repeated use, proceed as
follows:
Clean the floor, ceiling and side panels of the cooking
1.
compartment thoroughly.
Set 3D hot air.
:
2.
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
With the door closed, heat up the empty oven for
3.
approximately 2 hours at maximum temperature.
The ceramic coating is regenerated. When the cooking
compartment has cooled down, remove the brown or white
residue with water and a soft sponge.
Light discolouration of the coating does not affect automatic
self-cleaning.
15