Dish Network HDTV DVR Satellite Receiver User Manual page 76

Chapter 10
Operating Other Devices
Enabling and Disabling SAT Auto-Tune
Note: SAT Auto-Tune is enabled by default; however, the channel must be set (see
Setting SAT Auto-Tune Channel).
Press and hold SAT for three seconds until all four Mode buttons are lit.
1
2 Press STAR (*).
Press VOLUME UP to enable SAT Auto-Tune or VOLUME DOWN to disable.
3
Press POUND (#).
4
Removing SAT Auto-Tune Channel
Press and hold TV until it stays lit.
1
Press STAR (*).
2
Enter 00 or 000.
3
Press POUND (#).
4
68