Advertisement
For each new user, select "Serial & Network: Users & Groups" and click
"Add User."
Enter a username and enter and confirm a password.
Figure 5. Serial & Network: Users & Groups screen.
Select one or multiple group memberships for the user. To grant limited
access to the management console, check the "users" group. To grant full
access to the management console, check the "admin" group. By default,
the user is granted no management console access.
Nominate the dial-in options for the user and the accessible hosts and
accessible ports the user is allowed to access.
Click "Apply."
Note: The Value-Line Console Server comes with a default certificate for
initial configuration purposes only. You will need to direct your browser to
(temporarily) proceed and accept this untrusted certificate. It is
recommended as soon as possible thereafter you generate and install a new
trusted certificate. To produce the unique CSR and later upload the newly
issued certificate, select System: SSL Certificates.
8-Port Value-Line Console Server Quick Start Guide
724-746-5500 | blackbox.com
Page 7
Advertisement
