Black Box LES1508A User Manual page 5

8-port value-line console server qs guide

Hide thumbs Also See for LES1508A:

Note: The LES1508-A Value-Line Console Server comes with a second

network port (ETH2). This network is inactive by default; however it can be

set up to provide network failover/out-of-band access, or to provide a local

Management LAN.

Note: Use the Forwarding & Networking menu on System: Firewall to permit

remote IP access to devices on Network or Management LAN.

Step 4: Configure serial and network devices.



Select "Serial & Network: Serial Port," which will display the label, mode,

and protocol options currently set for the serial port. By default, all the

serial ports, except Port 1, are set to console server mode (see the user's

manual for other modes).



To configure a serial port, click "Edit."



Configure the common settings (baud rate, parity, data bits, stop bits, and

flow control) to match those of the serial device being controlled.

8-Port Value-Line Console Server Quick Start Guide

Figure 3. System: Services screen.

Figure 3. Serial & Network: Serial Port screen.

724-746-5500 | blackbox.com

Page 5