Humanware SmartView Synergy User Manual page 31

Contrast cannot be adjusted when in Enhanced
Contrast mode. Please consult the Enhanced
Contrast mode section for additional information.
• Check if the lights over the reading table are
turned on. If not, check the Light menu item in
the main menu.
If the colors are difficult to detect:
• Check that the color setting in the menu is 40%.
• Check that the lights over the reading table are
working.
If the contrast is low:
• Check the Contrast setting in the menu. The
contrast can only be adjusted in Color mode.
If the brightness is low:
Check the Brightness. Use the Brightness knob
•
to make adjustments. Remember that there are
different settings for Color and Enhanced
contrast modes.
• Check that both lights over the reading table
are working.
If there is a lot of glare:
• Reduce the Brightness.
• Reduce the external lighting effects.
• Tilt object in a different direction to reduce glare
23