Using The Reading Table; Adjusting The Lcd Screen - Humanware SmartView Synergy User Manual

1.5.3 Using the Reading Table

Use the Reading Table to move the items you wish
to magnify. To read a text, move the table towards
you and locate the beginning of the sentence. As
you continue reading, move the table to the left to
follow the sentence. To change lines, move the
table to the right and slightly away from you.
The Reading table is equipped with a Table Lock. It
is located in the center of the front edge of the
table. This feature allows you to set the resistance
of the Reading table. To increase the resistance of
the Reading Table, move the slider to the right. The
more you push the slider to the right, the more dif
ficult it will be to move the Reading Table. This will
provide you with more control and will decrease the
chances of accidentally moving away from what you
were viewing. When the slider is completely to the
right, the Reading table will be in locked position.
To decrease resistance, move the Slider to the left.

1.5.4 Adjusting the LCD Screen

The LCD screen's viewing angles and vertical position
can be adjusted to provide the optimal viewing
experience.
To adjust the LCD screen, hold both sides of the LCD
screen and
8