Bake Function - Black & Decker TO1635B Use And Care Book Manual

HELPFUL INFORMATION ABOUT YOUR OVEN
• You can change the temperature from ˚F to ˚C by pressing the ▲ and ▼ buttons
simultaneously.
• For your convenience, the unit always remembers the last selected setting unless unplugged.
You can change this setting before the oven begins preheating or once it has reached the
preset temperature and time.
• You cannot change the temperature or time during the preheat cycle. Once the set
temperature is reached, you can then change the time at any time.
• If using convection bake, remember to lower the suggested temperature of a recipe or
package by 25˚F.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always use oven
mitt or pot holder.
SLIDE RACK POSITIONS
There are 4 possible positions for the slide racks. There is an upper and a lower slot; the rack
can also be inverted for 2 additional positions.
Position 1: Use lower slots along oven walls. Insert rack using a rack-down position.
Position 2 : Use lower slots along oven walls. Insert rack using a rack-up position.
Position 3: Use upper slots along oven walls. Insert rack using a rack-down position.
Position 4 : Use upper slots along oven walls. Insert rack using a rack-up position.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
Note: You have 10 seconds for selecting the temperature and time. If you exceed this
time, the display will change back to the default (0 00) temperature and time; simply
repeat steps 1 - 5 below to begin again.
Note: You can stop the cooking at any time by pressing the I/O button.

BAKE FUNCTION

Selecting Cooking Temperature and Time
1. Press BAKE
(180 °C) default temperature flashes on the digital display.
2. To change the temperature, immediately press ▲ or ▼ button until you reach desired
temperature.
Note: Cooking temperature can be adjusted from 200˚F to 450˚F (93˚C - 232˚C).
• Tap button and release to change in increments of 5 degrees.
• Press and hold button to change rapidly in increments of 25 degrees.
3. To set the cooking time, press the TIME
the default cooking time of 0:30 (30 minutes) flashes on the display; otherwise it will
display the last selected time.
4. Immediately press ▲ or ▼ button to select desired time up to a maximum
of 2 hours.
• Tap button and release to change in one-minute increments.
• Press and hold button to change rapidly in 10-minute increments.
5. Once you have set desired temperature and time, press I/O button.
• Digital display flashes LO and PREHEAT until the unit reaches 150˚F (65˚C), then
it flashes temperature until the set temperature is reached.
6. Open oven door. Insert food to be cooked or heated on bake pan or pizza pan into the
oven.
7. Close oven door.
6
button. The unit beeps, On indicator light blinks and 350°F
button. If you just plugged in the unit,