Download  Print this page

Black & Decker HPL10RS Original Instructions Manual

Hand-held saw
Hide thumbs


Quick Links




  Related Manuals for Black & Decker HPL10RS

  Summary of Contents for Black & Decker HPL10RS

  • Page 1 HPL10RS...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker hand-held saw has been designed for sense when operating a power tool. Do not use a sawing wood, plastics and sheet metal. This tool is intended power tool while you are tired or under the influence for consumer use only.
  • Page 5: Residual Risks

    (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Use clamps or another practical way to secure and binding of moving parts, breakage of parts and any support the workpiece to a stable platform. Holding the other condition that may affect the power tools work by hand or against your body leaves it unstable and operation.
  • Page 6 ENGLISH (Original instructions) Injuries caused by touching any rotating/moving parts. Do not attempt to charge damaged batteries. Injuries caused when changing any parts, blades or ac- cessories. Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular Chargers breaks.
  • Page 7: Lock-Off Button

    (Original instructions) ENGLISH Assembly Warning! To prevent loss of control, never use tool without shoe. Warning! Before assembly, remove the battery from the tool and make sure that the saw blade has stopped. Used saw Fitting and removing the battery (fig. E) blades may be hot.
  • Page 8: Cutting Branches

    ENGLISH (Original instructions) Re-insert the battery (5). To maximize flush cutting capabilities: If the charging indicators continues flashing red at a fast Insert the blade shaft into the blade clamp with the teeth of rate, use a different battery to determine if the charging the blade facing up.
  • Page 9: Maintenance

    Your charger does not require any maintenance apart from regular cleaning. Technical data Warning! Before performing any maintenance on the tool, HPL10RS (H1) remove the battery from the tool. Unplug the charger before Input voltage cleaning it. 10.8...
  • Page 10: Ec Declaration Of Conformity

    Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 HPL10RS months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair Black &...
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...