Lens Replacement - Elation ELAR Tri Brick Manual

ELAR Tri Brick
™

13. LENS REPLACEMENT

The ELAR TRI BRICK comes with a removable front cover that allows the lens assembly to
be changed out to achieve different beam angles.
Lens cover is held in place by 4 screws on the back of the lens assembly. To remove the
cover; 1) Remove the securing fasteners in a counter-clockwise direction. 2) Once the
fasteners are removed, lift the cover straight up to expose the inner lens (see illustration
below). 3) Locate the securing screws on the inner cover and remove them. 4) Remove the
inner cover to access the four individual lens kits (see illustration below). Once the lenses
are changed reassemble in reverse order.
©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com