Home And Office Set-Up; Temporary Mobile Set-Up - Cobra 29 WX NW BT Operating Instructions Manual

Home And Office Set-Up

Base Station Base Station Operation
(From 120V AC House Current)
Operation
(From 120V AC
To operate your transceiver from home or office
you will need a 13.2 volt DC Power Pack rated at a
House Current)
minimum of 2 amps, and a properly installed base
station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120V AC.
Note
For further information call
Cobra Customer Service
1.773.889.3087.
1
28
+ —
Simply connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.

Temporary Mobile Set-Up

2 Plug power cable into back of unit marked
"Power" . Be sure to observe polarity markings.
3 Connect properly installed and matched base
station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter
from your COBRA dealer. This adapter and a mag-
netic mount antenna allow you to quickly "install"
your transceiver for temporary use.
Temporary
Mobile Set-Up
29