Home And Office Set-Up; Temporary Mobile Set-Up - Cobra 29 NW LTD CLASSIC Owner's Manual

Home And Office Set-Up

Base Station
Base Station Operation
Operation (From 120V AC House Current)
(From 120V AC
To operate your transceiver from home or office
House Current)
you will need a 13.8 volt DC Power Supply rated
at a minimum of 2 amps, and a properly installed
base station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120 vac.
Simply connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power supply.
24
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 24-25 AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 24-25

Temporary Mobile Set-Up

ANT
PA.SP. EXT.SP.
+ –
POWER
Plug power cable into back of unit marked
2
"Power". Be sure to observe polarity markings.
3 Connect properly installed and matched base
station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want
to purchase an optional cigarette lighter adapter
from your COBRA® dealer. This adapter and a
magnetic mount antenna allow you to quickly
"install" your transceiver for temporary use.
ANT
PA.SP. EXT.SP.
+ –
POWER
Temporary
Mobile Set-Up
25
2/24/21 2:57 PM 2/24/21 2:57 PM