Home And Office Set-Up; Temporary Mobile Set-Up - Cobra 29 LTD CLASSIC Owner's Manual

Home And Office Set-Up

Base Station
Base Station Operation
(From 120V AC House Current)
Operation
(From 120V AC
To operate the transceiver from your home or
House Current)
office you will need a 13.8 Volt DC Power Supply
rated at a minimum of 2 amps and a properly
installed base station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120V AC.
Simply connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power pack.
26

Temporary Mobile Set-Up

Plug the power cable into the jack marked
2
"Power" on the back of the unit. Be sure to
observe polarity markings.
Connect a properly installed and matched
3
base station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional automobile power adapter.
This adapter and a magnetic mount antenna
allow you to quickly "install" your transceiver for
temporary use.
Temporary
Mobile Set-Up
27