Cisco Linksys WET610N Quick Installation Manual page 7

WET610N
C.
Connect one end of the
included network cable to the
Ethernet port of the Bridge .
Then connect the other end to
the LAN port of the TV .
Select Continue .
D.
The TV is checking the Bridge .
Please wait; this may take a few
minutes .
E.
You have a choice of two setup
options:
Wi-Fi Protected Setup (WPS)
automatic setup
Scan manual setup
Wi-Fi Protected Setup (WPS) is a
feature that makes it easy to set
up your wireless network . If your
router supports Wi-Fi Protected
Setup, then it will have a button
that looks like one of the icons
in the picture .
NOTE: If your router uses WEP security, an encryption method
that is designed to help keep your data safe, for your wireless
network, please note that WEP is not supported by Wi-Fi
Protected Setup .
If your router supports Wi-Fi Protected Setup and you want to use this
option, select Wi-Fi Protected Setup (WPS) . Then select Continue .
Proceed to Wi-Fi Protected Setup, page 4 .
If your router does not support Wi-Fi Protected Setup, select Scan . Then
select Continue . Proceed to Scan (Manual Setup), page 7 .
Wireless-N Ethernet Bridge with Dual-Band
Wi-Fi Protected Setup Button on Router
Setup Selection
3