Cisco Linksys WET610N Quick Installation Manual page 12

Scan (Manual Setup)
C.
Select Change to display the
on-screen keyboard .
Use the number keypad on your
TV's remote control to enter
the network name . For different
characters, press the button
repeatedly until you see the
desired characters .
Press ENT on your TV's remote
control, or select Confirm to
save the network name .
Select Continue .
D.
If your network uses wireless
security, then select the
appropriate security mode:
WEP, WPA/WPA2-PSK (TKIP),
or WPA2-PSK (AES) . (WPA- or
WPA2-PSK is also known as
WPA- or WPA2-Personal .) Select
Continue . Proceed to step E .
If your network does not use security, then select None . Select
Continue . Proceed to step F .
NOTE: WPA-AES is not supported . If the router uses WPA-AES
for security, then please change this setting on the router and
your other wireless devices . For more information, refer to the
documentation for your router .
8 Wireless-N Ethernet Bridge with Dual-Band
WET610N