Cisco Linksys WET610N Quick Installation Manual page 14

Scan (Manual Setup)
H.
To save the new network
settings of the TV and connect
to the wireless network, select
Save & Connect .
I.
The TV is connecting to the
network . Please wait; this may
take a few minutes .
J.
The TV is connected to
the network . The status of
the Bridge, local network
connection, and Internet
connection are displayed . Select
OK to exit this screen .
If you encounter any problems, proceed to Troubleshooting, page 11 .
NOTE: For more information about how to install the Bridge for
use with the Sony BRAVIA TV, refer to the Online Reference Book
for your TV, and then search for the Network Setup section . For
other information about the Bridge, refer to the User Guide on
the CD included with the Bridge .
10
Congratulations! Setup is complete.
Wireless-N Ethernet Bridge with Dual-Band
WET610N