Scan (Manual Setup) - Cisco Linksys WET610N Quick Installation Manual

WET610N

Scan (Manual Setup)

IMPORTANT: If you have used Wi-Fi Protected Setup to create a
wireless connection between the TV and Bridge, then you do not
need to follow the instructions in the Manual Setup section . Your
setup is complete .
A.
The Bridge is searching for
available wireless networks .
Please wait; this may take a few
minutes .
B.
If your network is listed, select
it, and then select Continue .
Proceed to step D .
If your network is not listed,
select Manual Entry to enter
a wireless network name (also
called an SSID) . Then select
Continue .
Wireless-N Ethernet Bridge with Dual-Band
Scan (Manual Setup)
7