Table of Contents
Advertisement
Before Making Connections and Specifying Settings
1
Press the [Utility] key on the copier control panel.
2
Touch [Administrator Management].
3
Use the keypad to type in the administrator access code, and then
touch [Enter].
4
Touch [Admin. 2].
5
Touch [Network Set].
6
Touch [Basic Setting].
7
Specify the settings described above.
8
Touch [Enter].
Note
In order to apply the new settings, the unit must be turned off, then on
again.
Scanner Mode & Page Scope Light
1
1-9
Advertisement
Table of Contents
