Output Side (Simplified); Audio Outputs (Out); Control (Led); Input For The External Ac Power Supply - Lehmannaudio Black Cube Statement Manual

Output side (simplified)

1. Audio outputs (OUT)

RIAA-filtered high-level output. Please connect your output cables to the line input to be
used. For example, to a line-level preamplifier, active loudspeakers with volume control or
power amplifier input with volume control.
Be careful to preserve correct channel connections – left to left and right to right.
W A R N I N G: You must never connect the output cables to a following phono
input because RIAA-filtering and amplification would be done twice! You could
damage the following phono stage or your power amplifier and loudspeakers! The
resulting noise could even damage your hearing!!!
2.

Control (LED)

Lits when the Black Cube Statement audio sectionis connected to the power supply
3.

Input for the external AC power supply

The Black Cube Statement Audio section is connected to the external AC power supply. Ple-
ase make sure that you use a power supply with the correct voltage (18 - 22 V AC) that is
ground free.