41 | Common settings design, we can guarantee a listening experience of outstanding quality. The Black Cube Statement is superior to industrial mass products in every 42 | Expert notes respect. It meets the highest standards for the detailed musical playback of 44 | Sound optimisation tips your records.
Page 3
Black Cube Statement Black Cube Statement Important safety notes CAUTION! Read all safety and operation notes before putting the device to service. In this manual we use hierarchic ‘red flags’. Warning notes are printed in bold and also marked and highlighted by a symbol (warning sign) in the text.
Page 4
Black Cube Statement Black Cube Statement Power cable Mounting Use only power cables which are officially approved for your country. The power Use the device only in a safe, level position on a table, dolly or a special cable must be designed for the product and its corresponding power consump- designed stand.
1 | Unpacking - Locations exposed to high moisture levels and/or condensation After unpacking the Black Cube Statement check it for possible transport dam- - Locations exposed to various environmental influences ages. If you notice visible damages, you must by no means connect the device to - Locations exposed to continuous vibrations mains.
2 | Setup Always position the Black Cube Statement on a stable surface. Thanks to the compact dimensions and low weight, you can set up the Black Cube Statement directly next to the record player.
Page 7
This could damage the phono stage or speakers. 4 | Operating mode display (LED) When the LED is lit up, the Black Cube Statement is operational. The device does not have a power switch. 5 | External power supply input The included external power supply or an equivalent 24 V DC power supply is connected here.
43. MC 100 Ohm 3 | Connect the record player to the input on the Black Cube Statement. 4 | Connect the output on the Black Cube Statement to a line input on the MC 100 Ohm Mid output –...
1 | DC 1/DC 2 The MKP output capacitors are bridged with these Jumpers so they are no The Black Cube Statement can be adapted to virtually all sys- longer in the signal path. These Jumpers are not activated at delivery.
. This applies in particular to the system cables (headshell), the cables Power consumption app. 1 VA from the pick-up to the Black Cube Statement and the cables to the downstream pre-amplifier. Mains voltage 100 V to 240 V AC...
Black Cube Statement and line cable from No signal. Power supply is not Plug the power supply into the the Black Cube Statement to plugged in. outlet. the downstream input. Power supply is not con- Connect the power supply to...
Page 12
If a problem cannot be remedied with the help of this summary, please contact Cube Statement is con- Black Cube Statement to a the specialist retailer where you purchased the device. If this is not possible, you nected to the down-...
Each device from Lehmannaudio is tested individually and subject to a compre- hensive functional check. The use of only the very best components enables us For service works on the Black Cube Statement please contact the retailer where to grant a warranty of two years.
Page 14
WEEE Disposal of waste electronic equipment The crossed-out trash bin is the EC symbol for the separate disposal of waste electronic equipment. The Black Cube Statement contains electric and electronic components which, after disposal of the device, will either be reused or salvaged and recycled.