Description
The passive filter network of the Black Cube Statement is located between two linear active
amplifier stages. Phase errors that occur due to active filter designs are thereby eliminated.
Low-loss, high precision WIMA foil capacitors in the filter network are responsible for very
good localization and soundstage reproduction.
Sensitivity for 775mV/eff. output voltage: 0,77mV/7,7mV switchable on board (MC/MM).
Input capacitance: 100pF default
Input impedances: 47 kOhms/ 1 kOhms/100 Ohms switchble on board
(Dip-switches with
gold plated contacts), one slot for solder free installation of custom impedance on the prin-
ted circuit board (PCB). No need for expensive impedance plugs!
Output impedance: <100 Ohms
Gold plated RCA-connectors, massive ground connector
The external AC power supply of the Black Cube Statement can be placed up to two meters
away from the audio section. The AC voltage is rectified, regulated and buffered onboard
the audio pcb.
Case of 1,5mm aluminium protects the audio electronics.
Please read this manual first before connecting the Black Cube Statement to
mains voltage!