Installation; Functional Description - Makita 2012NB Instruction Manual

breakage of parts, mounting and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorized service
center unless
instruction manual. Have defective switches
replaced by an authorized service facility. Do not
use the tool if the switch does not turn it on and off.
21. Warning.
The use of any accessory or attachment, other
than those recommended in this instruction
manual or the catalog, may present a risk of
personal injury.
22. Have your tool repaired by a qualified person.
This electric tool is in accordance with the relevant
safety requirements. Repairs should only be
carried out by qualified persons using original
spare parts, otherwise this may result in
considerable danger to the user.
THICKNESSER SAFETY
WARNINGS
1. Wear eye protection.
2. Wear suitable personal protective equipment
when necessary, such as hearing protection
(ear plugs), respiratory protection (dust mask)
and gloves when handling rough material.
3. Do not use the tool in the presence of
flammable liquids or gases.
4. Make sure that all covers are installed in place
before operation.
5. Handle the blades very carefully.
6. Check the blades carefully for cracks or
damage before operation. Replace cracked or
damaged blades immediately.
7. Tighten the blade installation bolts securely.
8. Remove nails and clean the workpiece before
cutting. Nail, sand or foreign matter can cause
blade damage.
9. Do not remove chips from the chip chute when
the motor is running. Clean out chips after the
blades come to a complete stop. Always use a
stick etc. when cleaning them out.
10. Do not leave the tool running.
11. Do not abuse cord. Never yank cord to
disconnect it from the receptacle. Keep cord
away from heat, oil, water and sharp edges.
12. The tool should only be used for wood and
similar materials.
SAVE THESE INSTRUCTIONS.
otherwise indicated
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
in this
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

INSTALLATION

Movement and transport of thicknesser
1
2
GEB066-1
004462
CAUTION:
Watch your step when moving the tool.
•
Fold the sub-tables. Grasp the carrying handles when
moving the tool.
When transporting it by vehicle, secure with a rope or
other substantial means to prevent tipping or movement.
Positioning the thicknesser
003708
Locate the tool in a well lit and level place where you can
maintain good footing and balance. Bolt/screw it to the
workbench or stand (optional accessory) using the bolt
holes provided in the base.

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
4
1. Carrying handle
3
2. Sub-table
3. Carrying handle
1. Bolt or screw
1