4. At the Downloaded dictations section, check the checkboxes: 'Create the
SpeechExec properties at DPM download' and 'Set < Transcription Pending>
state for all DPM files'.
5. Next click the [Apply] button to save settings made.
Automatic conversion
Click on Automatic conversion from the DPM/DT Configuration submenu.
1. Select the checkbox to 'Convert automatically when downloading a dictation
from DPM (if not encrypted)'.
2. Click on the Configure...link.
3. At the Select Audio Format
window, select WAV as the File
type.
a. Check the check box to 'Show
all sound file formats'.
b. Then select the PCM format
from the Format drop down list.
c. Select the 8,000 kHz, 16 Bit,
Mono attribute from the
Attribute drop down list. Then
click [OK].
4. Next click the [Apply] button to
save settings made.
Delivery after download
Click on Delivery after download from the DPM/DT Configuration submenu.
1. Uncheck all check boxes for this setting.
2. Click the [Apply] button to save changes made.
Path of DPM
Click on Path of DPM from the DPM/DT
Configuration submenu.
1. Verify the path is set to Manual. The path
location will be: C:\Court Hearings - DPM.
a. Click on the button [...] to browse to the C
drive. Click on the [Make New Folder] button.
Page 23 of 33