Dictation; General Configuration; Automatic Conversion - Philips Pocket Memo Digital Recorder User Manual

20. At the Additional Information screen, do not select to 'Start the New User
Wizard' when you open the program. Click [Next] to continue.
The wizard configuration settings are complete but there are other settings you need to
confirm and establish.
General Settings Menu List

Dictation

Click on Dictation General Configuration from the General Settings menu.

General configuration

1. Verify that Classic DSS is selected in the right window pane. Classic DSS
requires less storage space than the DSS Pro. Click the [Apply] button if
enabled.

Automatic Conversion

Click on Automatic Conversion
from the Dictation submenu.
1. Check the checkbox to 'Convert
automatically when
opening/finishing a dictation' in
both the Open and Finish
Dictation sections with the
following settings. Click on the
Configure... link to set these
settings.
2. The Select Auto Format window
opens. Select WAV as the File
type.
a. Check the check box to
'Show all sound file formats'.
b. Then select the PCM format
from the drop down list.
c. Select the 8,000 kHz, 16 Bit, Mono attribute from the drop down list.
d. Then click [OK]. Repeat these steps for the Finish Dictation section.
Page 20 of 33