Setting The Display Position; Card Reader And Usb Connection; Inserting Memory Cards/Usb Memory Sticks With Mp3/Wma/Mpeg4/ Jpeg Data - Silvercrest KH 2360 Instruction Manual

3. If headphones are connected to the DVD player
or the LCD monitors there will be no sound out-
put from the AV output 3% of the DVD player or
from the built in speakers on the LCD monitors 5).
Important!
Listening to music over long periods with
full volume on headphones can lead to
hearing damage

7.5 Setting the display position

In the event that you find the image quality of a DVD
to be insufficient, slightly swivel the display to optimize
the viewing angle.
8. Card reader and USB
connection
8.1 Inserting memory cards/USB
memory sticks with
MP3/WMA/Mpeg4/ JPEG data
Note:
The DVD-Player always starts in DVD mode.
To read memory cards press the button
USB/CARD/DVD 1@ on the remote control.
The DVD player recognizes the data formats
JPEG, MP3, WMA and MPEG4. The cards
must be in FAT 16 or FAT 32 formats, the
player can not recognize NTFS. The player
only supports 3.3V memory cards, older types
with 5V operational voltage will not be recog-
nized.
Proper insertion of memory cards of the type SD and
MMC into the DVD player:
1. Switch the DVD player on.
2. Make sure that the LCD monitor is ready for
operation.
If the LCD monitors, the DVD player and possibly
other connected devices (i.e. an audio component)
are ready for operation and are switched on and
the DVD player is connected correctly to the LCD
monitors or to a television you will now see the Sil-
verCrest logo on the TV screen.
If no disc is inserted into the player NO DISC will be
displayed on the LCD monitors.
3. Now slide the memory card into the memory
card slot 4$ on the front panel of the DVD player.
Observe the following steps - depending on which
type of memory card you would like to playback.
Warning!
Always be sure to insert the memory cards
into the memory card slots as described below!
Never bend the memory cards while inserting
them into the memory cards slots!
Slide the memory card up to the stop in the
memory card slot, with a light pressure.
Allow the memory card to slide in without force:
• Check to make sure that the memory card is one
that the DVD player is capable of reading.
Important!
Do not attempt to insert memory cards of another
type in the memory card slot!
• Make sure that you have inserted the memory
card into the memory card slot in the correct manner.
• Under no circumstances attemt to force the memory
card into the memory card slot! Otherwise the
DVD player, memory card and the data on the
memory card could be damaged!
Supported memory card types
Memory cards of the type SD and MMC can be
played back.
- 14 -