11.4 Display signal of AV device
•
With the provided A/V cable you can connect A/V equipment,
e.g. an external DVD player.
•
Connect the video (yellow) and the audio (green) connectors to
the VIDEO IN/OUT (23) and AUDIO IN/OUT (22) jacks on the
DVD player.
•
Connect the RCA connector to the corresponding colour-coded
jacks on your TV set.
Press MODE (28) to select AV INPUT.
•
•
Now you will receive the signal of the external DVD player.
11.5 Connect digital amplifier
•
With an optical digital cable (not
supplied) you can connect the DVD
player to a digital amplifier.
•
Connect the digital cable to
OPTICAL OUT (22) on the DVD
player and to the optical digital input
of your amplifier.
Note:
•
Select the setting SPDIF/RAW or SPDIF/PCM in the setup
menu under Audio settings (page 42), depending on the
connected amplifier.
23