Playback Procedure For A Memory Card; Use; Switching The Device On And Off In The Standby Mode; Display Settings - Silvercrest KH 2360 Instruction Manual

8.4 Playback procedure for a memory
card:
If you have correctly inserted a memory card or a
USB memory stick into the SilverCrest DVD player
and pressed the button
remote control, the player automatically recognizes
the folders and data that exist on the memory medium.
These will be displayed on the screen in the players
data browser and, as is described in chapter 14,
are handled in exactly the same way as a DVD/
CD medium.
1@ on the
USB/CARD/DVD

9. Use

• Carry out the required connections as described
in chapter 7 and provide a power supply.
9.1 Switching the device on and off
in the standby mode
• Set the switch
POWER
switch the DVD player on.
The LCD monitors turn on and the background image
appears.
If no disc is inserted into the disc tray the notice
LOADING will appear briefly followed by the prompt
NO DISC.
• To switch the device to standby mode press the
button q on the remote control.
POWER
The Power LEDs 4* on the LCD monitors light up. In
this condition the device can again be switched on
via the button
POWER
• To switch off the DVD player altogether, set the
switch 4! to the position OFF.
POWER

9.2 Display settings

• Press the button
settings. The settings can be accessed at any
time.
• Select with the navigation buttons
of the inputs Contrast (Contrast), Hue (Hue),
Saturation (Saturation) and Sharpness (Sharp-
ness).
• With the navigation buttons
the value.
• To exit the settings press the button
again.

9.3 Setting the image format

• Set the switch
SCREEN
either to 4:3 or 16:9 to set the image format of the
LCD monitors.
- 16 -
4! to the position ON to
q on the remote control.
3) to access the display
TFT-MODE
3! o you change
TFT-MODE
5$ on each LCD monitor
1^ 1* one
3)