8. DMX-512 connection
Verify the power supply settings before applying power!
If you wish to change the power supply settings, see the chapter Appendix.
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected!
Cable(UE)
Brown
Liht blue
Yellow/Green
DMX-512 connection/connection between fixtures.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to
connect the controller with fixture or one fixture with another.
Caution:
At the last fixture ,the DMX-cable has to be terminated with a terminator. Solder
a 120 resistor between signal (-) and signal (+) into a 3-pin XLR-plug and it in the
DMX-output of the last fixture.
Cable(US)-208V
Black
White
Green
11
Pin
International
Live
L
Neutral
N
Earth