Programming Menu Items; Programming Multiple Stages - Amana DQ22HS Service Manual

"DQ & MC" Programming Instructions

Programming Menu Items

1. Open oven door. Display shows "door". If door is
closed or RESET is pressed before finishing
programming sequence, oven exits programming
mode.
2. Press and hold pad number 1 for five seconds. After
five seconds, signal sounds. "P" and active menu
display.
3. Press ADD to begin programming.
4. Press desired menu pad to be preprogrammed, if not
displaying. "MENU" indicator displays.
5 Press two number pads to be programmed. "QTY"
(quantity) and "LIMIT" indicators and the current
quantity limit flash.
NOTE: To change quantity limit:
• Press hidden enable pad. Locate hidden
enable pad to the immediate left and slightly
down from the MENU 1 pad. Signal sounds.
• Press number pad to enter quantity limit.
Maximum quantity limit for each menu item is
nine.
• Press START to save new quantity limit.
6. Press number pad to enter quantity. Quantity
selected, program time and power level for stage 1
display. "STG" (stage) indicator and stage numbers
with nonzero times also light up if multiple stages
exist.
NOTE: If quantity selected is not within quantity limit,
signal sounds. Repeat step 5.
7. Press numbers to enter desired cooking time.
8. Press POWER LEVEL. "COOK LEVEL" indicator
and current power level display.
9. Press numbers to enter power level if power level
other than 100% is desired. New power level
displays. For example, press pad number 2 for 20
percent power.
10.Press START pad to lock new heating time and
power level in oven memory. Display shows "P".
11. Press RESET pad or close oven door to exit
programming mode.

Programming Multiple Stages

1. Complete steps 1 - 9 of "Programming Menu Items".
2. Press STATUS pad to move through stages from
lowest to highest (1 to 4). Display shows "PX" for
one second followed by time and power level for
selected stage. "P" represents program, "X"
represents stage 1,2,3 or 4.
3. Press number pads to enter desired cooking time
and power level.
4. Repeat steps 3 - 4 for additional stages.
5. Complete steps 10 - 11 of "Programming Menu
Items".
13 RS2220001 Rev. 2