Displays; Cooking Methods; Cooking Displays; Programming Displays - Amana CRC18T2OG Service Manual

Displays

Cooking Methods

Memory Pads
This oven can of store either 10 or 100 cooking programs
in memory.
Single Pad Cooking
From the factory, it is programmed to store 10 cooking
programs. Each pad begins a cooking program.
Double Pad Cooking
The oven control can be changed to store up to 100
cooking programs. To set the control to 100 cooking
programs, see the "User's Options" section of this
manual. To heat when the oven is set for 100 programs ,
press 2 memory pads. For example, to start the first
program, press pad 0, then pad 1. To use the second
program, press pad 0, then pad 2. After the pads are
pressed, the oven starts automatically and time counts
down.
Manual Time Entry
Manual Time Entry feature allows the operator to heat
without changing the preprogrammed pads. Time must be
entered and power can be set before cooking. START pad
must be pressed to begin cooking.

Cooking Displays

MICRO DEFR WARM MEDHI POWER HOLD
READY shows when oven control will accept entries.
MICRO DEFR WARM MEDHI
25:20 shows cooking time. When more than one cooking
stage is programmed, total time for all stages displays.
POWER Shows when microwave energy is generated.
COOK LEVEL shows when oven is operating. 8 indicates
the microwave power level used. If number does not
show, oven is cooking at 100% power.
TIMER
READY
COOK
CLOCK
LEVEL
POWER HOLD
TIMER
READY
COOK
CLOCK
LEVEL

Programming Displays

MICRO DEFR WARM MEDHI POWER HOLD
This display indicates oven is in programming mode and
ready to program a numbered pad(s).
MICRO DEFR WARM MEDHI POWER HOLD
This display indicates oven is set to double pad entry and
2 pads must be pressed to enter a program. See
"Programming" section of manual for programming
procedure or "User Options" to change from single or
double pad entry.
MICRO DEFR WARM MEDHI POWER HOLD
This display shows briefly when programming more than
one stage. It indicates programming mode for pad 02.
The smaller "1" indicates stage 1 is being programmed.
MICRO DEFR WARM MEDHI POWER HOLD
This display indicates programming user options mode.
See "User Options" section of manual for programming
procedure.
MICRO DEFR WARM MEDHI POWER HOLD
This display indicates cooking factor of 80% when X2 pad
is pressed.
13
TIMER
READY
COOK
CLOCK
LEVEL
TIMER
READY
COOK
CLOCK
LEVEL
TIMER
READY
COOK
CLOCK
LEVEL
TIMER
READY
COOK
CLOCK
LEVEL
TIMER
READY
COOK
CLOCK
LEVEL
RS2240002 Rev. 1