Appendix A - Product Labeling; Power Supply - Datalogic MAGELLan 2200VS Quick Reference Manual

Appendix A. Product Labeling & Power Supply
IEC CLASS 1 LASER PRODUCT
Class IIa Laser Product. Avoid long term viewing of direct
laser light. Appareil á laser de classe IIa. Eviter toute
exposition prolongée de la vue à lumière laser directe.
Labels are shown here to illustrate their
location only. Please view the labels on
your product for actual details.
NOTE

Power Supply

Models require either a Listed class II or class III with a Limited Power Source
(LPS).
For the safety certification to be valid, class III input power sources must be
IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC ±10%
Max. Current: 1.5 A
Quick Reference Guide
6-1018
EAS Opening
Scanner Host
XXXXXXXXXXXX
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
THIS LASER PRODUCT COMPLIES WITH 21CFR 1040 AS APPLICABLE AS A CLASS IIA PRODUCT
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est confirme à la norme NMB-003 du Canada.
Input: 50 - 60 Hz (0.5 - 0.25A)
100 - 240VAC (P/N 8-0582)
Power: 18 Watts (max)
6-1012
Aux. Port Power
Output: 10 - 12 VDC ±10%
Product of USA
U
CAUTION - CLASS 3R LASER RADIATION WHEN OPEN.
PRODUCT SERVICE
AVOID DIRECT EYE EXPOSURE.
NRTL
COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: ... OTHER
PATENTS PENDING
Output:
+5V
+12V
Características de la
fuente de alimentación
eléctrica.
Entrada: 100 - 240 Vca
Atención
600mA 50/60 Hz
Salida: +12 VDC 1500mA.
(-) Negativo al centro
Utilice en su red solo fuentes certificadas
en Argentina.
El uso de fuentes de alimentación no
compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el
usuario.
S
N263
33