Download Print this page

Cable Holder - Sennheiser HSP 2 Instructions For Use Manual

Hide thumbs Also See for HSP 2:

Advertisement

HSP2.book Seite 17 Donnerstag, 27. Januar 2005 10:11 10

Cable holder

Attach the microphone cable to
the holder in the centre of the
neckband.
Note:
When attaching the thin cable,
make sure you also press the snall
cable sleeve into the holder or
the cable will fall out.
Changing the microphone
The connection between the
microphone boom and the
microphone cable ist very tight.
To loosen this connection, in-
sert your fingernail into the join
and then pull the connector and
the socket apart as shown .
Note:
When pulling apart, make sure you hold the thick end of
the connector and the socket (NOT the cable).
Pulling the thin microphone boom or the cable sleeve can da-
mage the microphone boom or cable. This will invalidate the
Sennheiser warranty
17

Advertisement

loading
Need help?

Need help?

Do you have a question about the HSP 2 and is the answer not in the manual?

This manual is also suitable for:

Hsp 4