9. Ensure that the bulb holder seal is
positioned as illustrated. Fit the round
seal on the fastening bolt.
Ofrecido por www.electromanuales.com
10. Insert bulb housing in vehicle body,
engaging ratchet and bolt in recesses.
Tighten attachment nuts by hand.
Engage plug connector. Close and lock
flap.
Self-help, vehicle care
11. Carry out the following steps to ensure
proper function of the tail lights:
–
Switch on ignition
–
Operate brake
–
Switch on parking lights
–
Check all tail lights illuminate
appropriately, e.g. engage
reverse gear and check
reversing lights are
illuminated.
243