Vauxhall Corsa 2007 Owner's Manual page 146

142 Driving and operation
Starting-off
Depress the footbrake, release the
handbrake and move the selector lever
+ -
to A, or . This will switch the Easytronic
to Automatic mode and engage first gear
(or second gear if the Winter programme is
enabled). "A" appears in the transmission
display.
The vehicle begins to "creep" when the
footbrake is released.
Ofrecido por www.electromanuales.com
It is also possible to start-off without
depressing the footbrake if the accelerator
pedal is operated directly after moving the
selector lever. If there is no acceleration or
the footbrake is not depressed, no gear is
engaged and "A" flashes. After a few
seconds, the display resumes showing "N".
Start-off by repeating the previously
described procedure.
In Automatic mode, selection of other
gears is automatic irrespective of driving
conditions.
Move selector lever towards A
Switch between Automatic and Manual
mode.
In Manual mode the gears can be shifted
manually. The transmission display shows
the currently engaged gear.
If the engine speed is too low the Easytronic
will automatically shift to a lower gear even
in Manual mode. This prevents the engine
from stalling.
Move selector lever towards + or -
+
Shift to a higher gear
-
Shift to a lower gear
If a higher gear is selected when the
running speed is too low, or a lower gear
when the speed is too high, no shift is
effected. This prevents the engine from
running at too low or too high revs.
Gears can be skipped by moving the
selector lever repeatedly at short intervals.