228
Self-help, vehicle care
Bulb replacement
Before replacing a bulb, switch ignition off
and turn relevant switch off.
Only hold new bulb at base. Do not touch
the bulb glass with bare hands, otherwise
fingerprints on the glass evaporate.
Residue builds up on the reflector
eventually resulting in a dull reflector.
Inadvertently stained bulbs may be
cleaned with a clean non-fluffy cloth, using
alcohol or white spirits.
The replacement bulb must be in
accordance with the data on the base of
the defective bulb. Do not exceed wattage
given on bulb base.
Ofrecido por www.electromanuales.com
To replace the bulb on the right-hand side,
remove the air hose from the air filter.
To replace the bulb on the left-hand side,
remove fusebox cover (see page 225) and
also remove windscreen wash system
reservoir filler neck from above. Wash fluid
may escape if the reservoir is full to the top.
Headlight aiming
We recommend that headlight aiming be
carried out by a workshop, who will have
special equipment.
When adjusting headlights, headlight
range adjustment must be set to 0.
Halogen headlight system
Headlight system with separate bulbs for
dipped beam 1 (outer bulbs) and main
beam 2 (inner bulbs).