Vauxhall Corsa 2007 Owner's Manual page 222

218 Self-help, vehicle care
7. Lightly grease the wheel bolt taper.
Make sure that the bolt threads are not
greased. Screw in wheel bolts and
tighten slightly, pushing the wheel bolt
wrench 3 on as far as possible.
8. Lower vehicle.
9. Tighten wheel bolts crosswise, putting on
wheel bolt wrench 3 as far as possible.
Ofrecido por www.electromanuales.com
10. Before refitting the wheel trim, clean the
wheel around the retaining clips. Valve
symbol 3 on back of wheel trim must
point towards valve on wheel.
Align and refit wheel trim or wheel bolt
caps 3.
Alloy wheels 3: Align and refit wheel
bolt caps 3.
11. Stow replaced wheel, tools and warning
triangle 3 in luggage compartment –
see pages 210 to 213.
12. Check the tyre pressure of the newly
fitted wheel. Adjust as necessary.
13. Have the tightening torque of the wheel
bolts on the new wheel checked on the
vehicle using a torque wrench as soon
as possible and, if necessary, corrected.
Tightening torque – see page 280.
14. Replace the faulty tyre on the wheel
that was removed.
15. Replace temporary spare wheel 3 with
a full specification wheel without delay.
16. Initialise the Deflation Detection System
(DDS) 3 – see page 173.