Orchid Telecom KS 416 System Administration Manual page 24

• Make sure the phone being used to program is set to TONE not PULSE dialling mode.
• Dial the password
confirmation beep (beep) when the password or any programming sequence is entered
correctly.
I want to Make a Call out on a Specific Line
To access any line directly dial # followed by the line number
Replacing a Key Phone with a Standard Phone
If for whatever reason you want to replace a Key Phone with a standard phone you need to dial
# # # 0 when the standard phone has been plugged in.
Failure to do so will result in the standard phone not ringing.
NB If in Direct Dial mode you need to dial * # # # 0.
I want to add a PDQ (Credit Card) Machine to the system
It is important that the PDQ machine is connected to one of the extension ports and not directly to
a phone line. Connecting to the phone line will cause false rings. When connecting to an
extension make sure the extension is programmed for direct mode (no need to dial 9 for a line)
see page 10
Contact Orchid for more assistance
You can email us at the following address with any further enquiries regarding the Orchid PBX
Range. Info@orchid-telecom.com
(* * 01 1234 #) before entering programming strings. You will hear a
24