Seat Pad 1 14190; Back Pad 1 14189; Handle Pop Pin; Seat Adjuster 1 14128 - Nautilus NS-700 Assembly Instruction Manual

step
5
Step #5 Materials:
# Component
28 Seat Pad
29 Back Pad
30 T handle Pop Pin
31 Seat Adjuster
32

Seat Cross Tube

33 Back Pad Tube
34

Back Pad Adjustment

35 Back Pad Adjustment Plate
74 Hex Bolt - 1/2" x 3 1/4"L
79 Hex Bolt - 3/8" x 3"L
81 Hex Bolt - 3/8" x 2 1/4"L
83 Hex Bolt - 3/8" x 1 3/4"L
94 1/2" Flat Washer
95 3/8" Flat Washer
96 1/2" Lock Nut
97 3/8" Lock Nut
A. Attach Seat Cross Tube (32) to Seat Adjuster (31) using
hardware shown. Tighten hardware securely.
Qty
B. Attach Seat Pad (28) to Seat Cross Tube (32) and Seat
Adjuster (31) using hardware shown. Tighten hardware
securely.
1
C. Install Seat Adjuster (31) in Leg Extension Frame (8) in
1
the slot shown. Install Pop Pin (30) using an adjustable
2
wrench. NOTE: Pop Pin is threaded so that the seat
1
can be locked into position.
1
D. Attach Back Pad Tube (33) to Back Pad (29) using
1
hardware shown. Tighten hardware securely.
1 E. Attach Back Pad Tube (33) to Back Pad Adjuster (34)
using hardware shown. Tighten hardware securely
1
making sure that the Back Pad Tube can rotate freely.
1
F. Attach Back Pad Adjustment Plate (35) to Back Pad
2
Tube (33) using hardware shown, making sure that the
2
Back Pad Adjustment Pin rests inside the slot of the
3
Back Pad Adjustment Plate (35). Tighten hardware
3
securely make sure the Back Pad Adjustment Plate can
9 rotate freely.
G. Install Back Pad Adjuster (34) in Front Upright (7) in the
2
slot shown. Install Pop Pin (30) using an adjustable
2
wrench.
8
NS-700