DIVAR IP 6000 1U
1
2
To remove hard drive trays from the chassis:
1.
2.
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
3.2.2
Installing a hard drive
The drives are mounted in drive carriers.
To install a hard drive to the hard drive carrier:
1.
Bosch Sicherheitssysteme GmbH
Drive carrier
Dummy drive
Press the release button on the drive carrier. This extends the drive carrier handle.
Use the handle to pull the drive out of the chassis.
Remove the screws securing the dummy drive to the carrier.
Installation manual
Chassis setup and maintenance | en
2014.01 | V2 | DOC
15