Fixture Info; Set - Strong Neeva User Manual

Edit
Step X
There are four steps available of edit. Use the Up and Down functions to move to the step
you wish to edit. Use the Enter function to drop down into a new set of menus. These are
Enable, Delay, Speed, White, Blue, Green, and Red. Use the Enter, Up and Down function
buttons to set values for each of these step attributes. Use the Menu function to move up
from each value to be able to proceed to the next attribute.
The Enable screen can be set to On or Off. This chooses the steps that will be part of your
show.
Once you have programmed your steps and enabled them you can use the Player screen to
set the fixture to On. This will place the fixture in Auto mode and play your show. Turning
the Player screen to Off returns the fixture to DMX mode.

Fixture Info

Neeva includes some informational screens with important troubleshooting information.
From the main display press the Enter function then the Up function until you see the
following display.
Info
From here use the Enter function and then the Up or Down function to display the SftVer
(Software Version), LedTemp, and FanRPM of the fixture. Use the Menu function to move
back to the main display.

Set

Neeva includes a set of Setup screens that program important operational aspects of the
fixture. From the main display press the Enter function then the Up function until you see
the following display.
Set
From the Set screen you can first access the Fact Defaults screen. This function is
different from the Fact Setings function in that this function resets the values programmed
7