Dmx Channel Information; Setting Dmx Address - Strong Neeva User Manual

DMX Channel Information

The home display of the user interface is the DMX status screen. If this screen is not the
current display press the Menu function until this display appears:
Dmx: On
Addr:XXX
The word after Dmx: will be either On or Off indicating that the fixture is either receiving
DMX from a control source or not. It the fixture is in Auto mode you will not be able to
access this screen no matter how many times you press the Menu function. You will see a
display like this:
Auto:On
Step: X
From either the Dmx or Auto screen simply press the Enter function to access the full set
of fixture functions. For detailed information on Auto operation see the section on
Recording Scenes below.

Setting DMX Address

Setting the DMX address is likely to be the most common operation accessed via the user
interface. From the home display do this press the Enter function:
DmxAdr
XXX
Use the Enter function to move the Up/Down arrow to the lower line of the display. The
value on the second line of the display will now be shown with brackets around that value.
This indicates that the Up and Down function have incremented that value and that you
must use the Enter function to save this new value. Pressing the Menu function at any
point will move you up the path you took to get to your current display and will not record a
pending change in value.
DmxAdr
[XXX]
5