Recording Scenes; Programming Steps - Strong Neeva User Manual

Use the Up and Down functions to increment the display to the desired address. Once that
address is displayed use the Enter function to confirm that value. Then press the Menu
function and the Up/Down arrow will return to the first line of the display allowing you to
either return to the main display or use the Up and Down functions to access other fixture
functions.

Recording Scenes

The Auto menu is used to enable and record scenes for standalone operation of the Neeva.
Auto
To start the menu use the Enter function from the Auto display.
Player
On
From this screen you can use the Enter function to move the Up/Down arrow to the
second line and then change the state of the Player from On to Off by using the Up or
Down function. Alternatively, you can use the Up and Down functions while the Up/Down
arrow is on the first line to move to the next menu. The first of these is the Fact Settings
menu.
Fact
Settings
If you use the Enter function you will see the Fact Set? screen and a second press of the
Enter function will reset your fixture to original Factory Settings clearing your scene
memory
.

Programming Steps

If you are at the Player screen display show above you can use the Up function to proceed
to the Edit Steps display.
Edit
Steps
When you use the Enter function you will see the Edit Step X display.
6